Perfshowporteemask - HP StorageWorks 2/64 - Core Switch Command Reference Manual

perfShowPortEEMask

Displays the current address mask for end-to-end performance monitors on a port.
Synopsis
perfshowporteemask [slotnumber/]portnumber
Availability
all users
NOTE: This command requires a Performance Monitor license.
Description
Use this command to display the current mask shared across all end-to-end (EE) performance monitors of
a port. There are only two commands that can modify the value of the EE mask:
and perfCfgRestore.
The end-to-end mask has 12 fields:
TxSID Domain:
TxSID Area:
TxSID ALPA:
TxDID Domain:
TxDID Area:
TxDID ALPA:
RxSID Domain:
RxSID Area:
RxSID ALPA:
RxDID Domain:
RxDID Area:
RxDID ALPA:
The fields that are marked on are used to trigger end-to-end monitors. The default value of the EE mask is
all fields set to on.
Operands
This command has the following operand:
slotnumber
portnumber
434 Fabric OS commands
on
on
on
on
on
on
on
on
on
on
on
on
For bladed systems only, this operand specifies the slot number of the
port on which the monitor is to be added, followed by a slash (/).
Specifies the number of the port on which the monitor is to be
added, relative to its slot for bladed systems. Use
list of valid ports.
perfSetPortEEMask
for a
switchShow