portLogTypeEnable
Enables the port log of a specified type.
Synopsis
portlogtypeenable id
Availability
admin
Description
Use this command to enable the port log for a specified port log type.
Operands
This command has the following operand:
id
Examples
To enable event 2 to report to the port log:
switch:admin> portlogtypeenable 2
See also
portLogEventShow
portLogTypeDisable
Specify a nonzero value that corresponds to the port log type to be
enabled. The values corresponding to different log types can be
obtained by running portLogEventShow.
Fabric OS 5.x command reference guide 499