Errdelimiterset - HP StorageWorks 2/64 - Core Switch Command Reference Manual

errDelimiterSet

Sets the error log start and end delimiter for messages sent to the console and syslog.
Synopsis
errdelimiterset [-s "start_delimiter_string"] [-e "end_delimiter_string"]
Availability
admin
Description
Use this command to set the error log start and end delimiter for log messages sent to the console and
syslog. An empty string clears the start and the end delimiters (including the colon) so that they are not
displayed.
If no arguments are supplied to the command, it instead displays the existing
configuration. These delimiters are stored persistently.
Operands
This command has the following optional operands:
-s start_delimiter_string
-e end_delimiter_string
Examples
To display the start and end delimiter:
switch:admin> errdelimiterset
delimiter start string: <none>
delimiter end string: <none>
To change the start and end delimiter (with sample output):
switch:admin> errdelimiterset -s "Start" -e "End"
Start:2003/03/10-09:54:03, [NS-1002], 1035,, ERROR, SWITCH43, Name
Server received an invalid request from device 10:02:32:A3:78:23:23:End
See also
errDump
errFilterSet
errShow
Specifies the alphanumeric string for the start delimiter;
up to 10 characters are allowed.
Specifies the alphanumeric string for the end delimiter;
up to 10 characters are allowed.
Fabric OS 5.x command reference guide 169
errDelimiterSet