Qloopshow - HP StorageWorks 2/64 - Core Switch Command Reference Manual

qloopShow

Displays QuickLoop information.
Synopsis
qloopshow [pattern][, mode]
Availability
all users
NOTE: This command requires HP Advanced Zoning license, which is included within the Base
Configuration Services and bundled with each B-series switch.
Description
Use this command to display QuickLoop configuration information.
If no parameters are specified, all zone configuration information (defined and enabled) is displayed.
See
cfgShow
If a parameter is specified, it is used as a pattern to match QuickLoop names; those that match in the
defined configuration are displayed.
This command changes the Defined Configuration. For the change to be preserved across switch reboots,
it must be saved to flash memory using the
appropriate zone configuration must be enabled using the
NOTE: When security is enabled, this command can be issued only from the primary FCS switch.
Use this command only with Fabric OS 3.x systems in the fabric; QuickLoop is not supported in Fabric
OS 5.x.
Operands
The following operands re optional:
pattern
mode
for a description of this display.
Specify a POSIX-style expression used to match QuickLoop
names. Patterns can contain the following special characters:
• Question mark "?", which matches any single character
• Asterisk "*", which matches any string of characters
• Ranges "[0-9a-f]", which match any character within the
range
Specify 1 to display the contents of RAM; specify 0 to display
the contents of the transaction buffer. The default value is 0.
command. For the change to become effective, an
cfgSave
cfgEnable
Fabric OS 5.x command reference guide 543
command.