Aliadd - HP StorageWorks 2/64 - Core Switch Command Reference Manual

aliAdd

Adds a member to a zone alias.
Synopsis
aliadd "aliName", "member; member"
Availability
admin
NOTE: This command requires HP Advanced Zoning, which is included within the Base Configuration
Services and bundled with each B-series switch.
Description
Use this command to add one or more members to an existing zone alias. The alias member list cannot
contain another zone alias.
This command changes the defined configuration. For the change to be preserved across switch reboots,
it must be saved to flash memory using the
appropriate zone configuration must be enabled using the
NOTE: When security is enabled, this command can be issued only from the primary FCS switch.
Operands
This command has the following required operands:
"aliName"
"member"
Examples
To add members to zone aliases array1, array2, and loop1:
switch:admin> aliadd "array1", "1,2"
switch:admin> aliadd "array2", "21:00:00:20:37:0c:72:51"
switch:admin> aliadd "loop1", "4,5[0x02]; 6,7[0xEF]"
command. For the change to become effective, an
cfgSave
Specify the name of a zone alias, in quotation marks.
Specify a member or list of members to be added to the alias, in
quotation marks, separated by semicolons. An alias member
can be specified by one or more of the following methods:
• A switch domain and port area number pair. View the area
numbers for ports using the
• WWN
• QuickLoop AL_PAs
command.
cfgEnable
command.
switchShow
Fabric OS 5.x command reference guide 35