HP StorageWorks 2/64 - Core Switch Command Reference Manual page 717

-s slot
-h hostip
-u username
-p password
-d remotedirectory
-f remotefile
Examples
To retrieve a trace dump file:
switch:admin> traceftp -n -h 192.168.67.126 -u anonymous -d tracedump -f
dumpfile
ftp trace dump file in progress...
ftp trace dump file succeeded
To enable the auto-FTP feature:
switch:admin> traceftp -e
trace auto-FTP enabled
To disable the auto-FTP feature:
switch:admin> traceftp -d
trace auto-FTP disabled
See also
supportFtp
supportSave
supportShow
traceDump
traceTrig
Specifies the slot number from which a trace dump is
generated. If this is not supplied, the trace dump is generated
from the local slot.
Specifies the FTP host IP address. It must be an IP address.
hostip should be less than 48 characters.
Specifies the FTP user name. username should be less than
48 characters.
Specifies the FTP user password. If the user name is
anonymous, the password is not needed. password should
be less than 48 characters.
Specifies the remote directory in which to store a trace dump
file. cannot take a slash ( / ) as a directory name.
traceFtp
remotedirectory should be less than 48 characters.
Specifies the remote file in which to store a trace dump file.
remotefile should be less than 48 characters.
Fabric OS 5.x command reference guide 717