HP StorageWorks 2/64 - Core Switch Command Reference Manual page 785

Table 28 switchAdmin commands (continued)
Command
snmpMibCapShow
supportShow
supportShowCfgDisable
supportShowCfgEnable
supportShowCfgShow
switchBeacon
switchCfgPersistentDisable
switchCfgPersistentEnable
switchCfgSpeed
switchCfgTrunk
switchDisable
switchEnable
switchName
switchShow
switchStatusPolicySet
switchStatusShow
switchStatusShow
switchUptime
syslogdIpAdd
syslogdIpRemove
syslogdIpShow
systemVerification
tempShow
timeout
topologyShow
traceDump
traceFtp
Description
Displays options for configuring SNMP MIB trap capability.
Displays switch information for debugging purposes.
Disables a group of commands under the
Enables a group of commands under the
Displays the groups of commands enabled for display by the
command.
supportShow
Sets switch beaconing mode on or off.
Disables a switch persistently.
Enables a switch persistently.
Configures all ports of a switch to a particular speed.
Enables or disables trunking on all the ports of a switch.
Disables the switch.
Enables the switch.
Displays or sets the switch name.
Displays switch and port status.
Sets the policy parameters that determine overall switch status.
Displays the policy parameters that determine overall switch status.
Displays overall switch status.
Displays the amount of time the switch has been operating.
Adds the IP address of a syslog daemon.
Removes the IP address of a syslog daemon.
Displays all syslog daemon IP addresses.
Runs a suite of diagnostic tests on all switches in a fabric.
Displays temperature readings.
Sets or displays the idle timeout value for a login session.
Displays the unicast fabric topology.
Displays, initiates, or removes a trace dump.
Displays, enables, or disables the trace auto-FTP or FTPsa trace dump
file to the customer FTP server.
Fabric OS 5.x command reference guide 785
command.
supportShow
command.
supportShow