Cfgremove - HP StorageWorks 2/64 - Core Switch Command Reference Manual

cfgRemove

Removes a member from a zone configuration.
Synopsis
cfgremove "cfgName", "member [; member ...]"
Availability
admin
NOTE: This command requires HP Advanced Zoning, which is included within the Base Configuration
Services and bundled with each B-series switch.
Description
Use this command to remove one or more members from an existing zone configuration.
If all members are removed, the zone configuration is deleted.
This command changes the defined configuration. For the change to be preserved across switch reboots, it
must be saved to flash memory using the
appropriate zone configuration must be enabled using the
NOTE: When security is enabled, this command can be issued only from the primary FCS switch.
Operands
The following operands are required:
cfgName
member
Examples
To remove a zone from a configuration:
switch:admin> cfgremove "Test_cfg", "redzone"
See also
cfgAdd
cfgClear
cfgCreate
88 Fabric OS commands
command. For the change to become in effect, an
cfgSave
Specify a name for the zone configuration, in quotation marks.
Specify a zone member or list of zone members to be added to
the configuration, in quotation marks and separated by
semicolons. Members can be specified in one or more of the
following ways:
• Zone names
• QuickLoop names
• FA (Fabric Assist) zone names
command.
cfgEnable