HP StorageWorks 2/64 - Core Switch Command Reference Manual page 519

fl_cls_rx
fl_bb_stall
fl_cf_alloc
fl_cf_opn
fl_cf_full
fl_cf_na
fl_trig_age
fl_trig_lp
open
transfer
opened
starve_stop
fl_tenancy
nl_tenancy
frame_nozone
Operands
This command has the following operands:
slotnumber
portnumber
Examples
To display the basic set of statistics for a port:
switch:user> portstatsshow 4/15
stat_wtx
stat_wrx
stat_ftx
stat_frx
stat_c2_frx
stat_c3_frx
stat_lc_rx
stat_mc_rx
stat_mc_to
stat_mc_tx
(continued on next page)
CLS received when OPEN.
OPN/CLS BB_Credit stalls.
Number of CFIFOs allocated.
CFIFOs delivered when OPENED.
Number of CFIFOs full stalls.
CFIFO not available stalls.
Number of age count triggers.
Number of loop not busy triggers.
Number of times the FL_Port entered OPEN state.
Number of times the FL_Port entered TRANSFER
state.
Number of times the FL_Port entered OPENED
state.
Loop tenancies stopped due to starvation.
Number of times FL_Port had loop tenancy.
Number of times NL_Port had loop tenancy.
Frames rejected due to zone protection.
For bladed systems only, specify the slot number of the port to be
configured, followed by a slash (/).
Specify a port number to be configured, relative to its slot for bladed
systems. Use
switchShow
494 4-byte words transmitted
760 4-byte words received
28 Frames transmitted
32 Frames received
0 Class 2 frames received
32 Class 3 frames received
0 Link control frames received
0 Multicast frames received
0 Multicast timeouts
0 Multicast frames transmitted
to display a list of valid ports.
Fabric OS 5.x command reference guide 519