HP StorageWorks 2/64 - Core Switch Command Reference Manual page 803

Hp storageworks fabric os 5.x command reference guide (aa-rvhvb-te, september 2005)
Hide thumbs Also See for StorageWorks 2/64 - Core Switch:
Table of Contents

Advertisement

FAN
Fabric address notification. Retains the AL_PA and fabric address when a loop reinitializes, if
the switch supports FAN.
fan-in
The ratio of hosts to storage devices; the view of the SAN from the storage port's perspective.
fan-out
The ratio of storage devices to hosts; the view of the SAN from the host port's perspective.
FC-0
Lowest layer of Fibre Channel transport. Represents physical media.
FC-1
Layer of Fibre Channel transport that contains the 8b/10b encoding scheme.
FC-2
Layer of Fibre Channel transport that handles framing and protocol, frame format,
sequence/exchange management, and ordered set usage.
FC-3
Layer of Fibre Channel transport that contains common services used by multiple N_Ports in a
node.
FC-4
Layer of Fibre Channel transport that handles standards and profiles for mapping upper-level
protocols such as SCSI and IP onto the Fibre Channel Protocol.
FC-AL-3
The Fibre Channel arbitrated-loop standard defined by ANSI. Defined on top of the FC-PH
standards.
FC-AV
Fibre Channel audio visual.
FC-CT
Fibre Channel common transport.
FC-FG
Fibre Channel generic requirements.
FC-FLA
The Fibre Channel fabric loop-attach standard defined by ANSI.
FC-FS
Fibre Channel framing and signaling.
FC-GS
Fibre Channel generic services.
FC-GS-2
Fibre Channel generic services, second generation.
FC-GS-3
Fibre Channel Generic Services, third generation.
FCIP
Fibre Channel over IP.
FC-NAT
Fibre Channel network address translation.
FC-PH
The Fibre Channel physical and signaling standard for FC-0, FC-1, and FC-2 layers of the
Fibre Channel Protocol. Indicates signaling used for cable plants, media types, and
transmission speeds.
FC-PH-2
Fibre Channel Physical Interface, second generation.
FC-PH-3
Fibre Channel Physical Interface, third generation.
FC-PI
Fibre Channel Physical Interface standard, defined by ANSI.
The Fibre Channel Private Loop Direct Attach standard defined by ANSI. Applies to the
FC-PLDA
operation of peripheral devices on a private loop.
FC_SB
Fibre Channel single bytes.
FC_VI
Fibre Channel virtual interface.
FCA
Flow-control acknowledgement (DLSW).
Fabric OS 5.x command reference guide 803

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storageworks fabric os 5

Table of Contents