Setesdmode - HP StorageWorks 2/64 - Core Switch Command Reference Manual

Hp storageworks fabric os 5.x command reference guide (aa-rvhvb-te, september 2005)
Hide thumbs Also See for StorageWorks 2/64 - Core Switch:
Table of Contents

Advertisement

setEsdMode

Enables or disables ESD mode.
Synopsis
setesdmode [mode | -show]
Availability
admin
Description
Use this command to enable or disable ESD mode. The mode is saved in flash memory and stays in that
mode until the next execution of setEsdMode. The mode becomes active as soon as this command is
executed. It does not require a reboot to take effect.
ESD mode modifies the behavior of the diagnostic test methods and post scripts. The exact behavior
varies but most commonly consists of disabling the ports defined when
tests are run for ESD or EMI testing purposes.
Operands
This command has the following operands:
mode
-show
If no operand is specified, the current value displays.
Examples
To display the ESD mode:
switch:admin> setesdmode -show
Esd Mode is 0 (Disabled).
See also
spinSilk
Specify 1 to enable ESD mode, 0 to disable ESD mode. This
operand is optional.
Specify this operand to display the current mode setting. This
operand is optional.
or other functional
spinSilk
Fabric OS 5.x command reference guide 617

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storageworks fabric os 5

Table of Contents