Sectemppasswdreset - HP StorageWorks 2/64 - Core Switch Command Reference Manual
Hp storageworks fabric os 5.x command reference guide (aa-rvhvb-te, september 2005)
Hide thumbs
Also See for StorageWorks 2/64 - Core Switch:
- Reference manual (278 pages) ,
- Installation manual (166 pages) ,
- Administrator's manual (152 pages)
Table of Contents
Advertisement
secTempPasswdReset
Resets a temporary password on a remote switch.
Synopsis
sectemppasswdreset [domain[, "login_name"]]
Availability
admin
Description
Use this command to remove temporary passwords that were set up using
command.
If a login name is not supplied, all passwords on the switch identified by the specified domain are
refreshed. If the domain is also not supplied, all temporary passwords for all login levels are removed
from every switch in the fabric.
Each switch has four accounts: root, factory, admin, and user. Root and factory accounts are disabled for
non-FCS switches. If they are temporarily activated by secTempPasswdSet, those accounts are
disabled by
secTempPasswdReset
NOTE:
This command can be issued only from secure mode and only from the primary FCS switch.
Operands
This command has the following operands:
domain
login_name
or rebooting the switch.
Specify the domain of the switch from which the temporary passwords
are to be removed. This operand is optional.
Specify the name of the login account from which the temporary
password are removed. This operand is optional.
secTempPasswdSet
Fabric OS 5.x command reference guide 609
Advertisement
Table of Contents
