Switchcfgpersistentdisable - HP StorageWorks 2/64 - Core Switch Command Reference Manual
Hp storageworks fabric os 5.x command reference guide (aa-rvhvb-te, september 2005)
Hide thumbs
Also See for StorageWorks 2/64 - Core Switch:
- Reference manual (278 pages) ,
- Installation manual (166 pages) ,
- Administrator's manual (152 pages)
Table of Contents
Advertisement
switchCfgPersistentDisable
Disables a switch persistently.
Synopsis
switchcfgpersistentdisable
Availability
admin
Description
Use this command to persistently disable the switch. All Fibre Channel ports are taken offline. If the switch
was part of a fabric, the remaining switches reconfigure. The switch remains disabled even after a
reboot.
The disable process can be observed and verified by watching the front panel LEDs change to slow
flashing yellow as each port is disabled.
A persistently disabled switch can be temporarily enabled using the
temporarily enabled switch remains disabled after a reboot.
NOTE:
Performance Monitoring cannot be added to any port on a persistently disabled switch.
Operands
none
Examples
To disable a switch persistently:
switch:admin> switchcfgpersistentdisable
See also
switchDisable
switchEnable
switchCfgPersistentEnable
switchShow
command. A
switchEnable
Fabric OS 5.x command reference guide 683
Advertisement
Table of Contents
