Portlogshow - HP StorageWorks 2/64 - Core Switch Command Reference Manual

portLogShow

Displays the port log.
Synopsis
portlogshow [count, saved, portid]
Availability
all users
Description
Use this command to display the port log, page by page.
The
portLogShow
press Enter after each page of output.
Port logs are circular log files in the switch firmware, which can save up to 8,192 entries. See
portLogConfigShow
delete the oldest log entries. Port logs capture switch-to-device, device-to-switch, switch-to-switch, some
device-to-device, and control information.
If the port log is disabled, the following message displays as the first line. See
for more information.
WARNING: port log is disabled
The following information displays for each log entry:
Time
Task
Event
command displays the same information as portLogDump, but it enables you to
to display the current port log size. Once the log is full, the newest log entries
Displays the event date and time in milliseconds. The clock resolution is 16
milliseconds.
Displays the name of the internal switch procedure that logged the event,
interrupt if the event was logged in interrupt context, or unknown if the task
no longer exists.
Displays the task event that generated log entry. Possible events include:
start A switch start or re-start event
disable A port is disabled
enable A port is enabled
ioctl A port I/O control is executed
Tx A frame is transmitted (class is indicated)
Rx A frame is received (class is indicated)
scn A state change notification is posted
pstate A port changes physical state
reject A received frame is rejected
busy A received frame is busied
ctin A CT based request is received
ctout A CT based response is transmitted
errlog A message is added to the error log
loopscn A loop state change notification is posted
create A task is created
debug A debug message
nbrfsm Neighbor state transition
portLogClear
Fabric OS 5.x command reference guide 491
command