Slotshow - HP StorageWorks 2/64 - Core Switch Command Reference Manual
Hp storageworks fabric os 5.x command reference guide (aa-rvhvb-te, september 2005)
Hide thumbs
Also See for StorageWorks 2/64 - Core Switch:
- Reference manual (278 pages) ,
- Installation manual (166 pages) ,
- Administrator's manual (152 pages)
Table of Contents
Advertisement
slotShow
Displays the status of all slots in the system.
Synopsis
slotshow
Availability
all users
Description
Use this command to inventory and display the current status of each slot in the system. The fields and
their possible values are as follows:
Slot
Blade Type
ID
Status
Operands
none
Displays the physical slot number.
Displays the blade type:
•
SW BLADE—The blade is a switch.
•
CP BLADE—The blade is a control processor.
•
UNKNOWN—Blade not present or its type is not recognized
Displays the hardware ID of the blade type.
Displays the status of the blade:
•
VACANT—The slot is empty.
•
INSERTED, NOT POWERED ON—The blade is present in the slot but is turned
off.
•
DIAG RUNNING POST1—The blade is present, powered on, and running the
POST (power-on self-test).
•
DIAG RUNNING POST2—The blade is present, powered on, and running the
POST (power-on self-test).
•
ENABLED—The blade is on but the external ports are disabled using
bladeDisable.
•
DISABLED—The blade is powered on but disabled.
•
FAULTY—The blade is faulty because an error was detected.
•
UNKNOWN—The blade is inserted but its state cannot be determined.
Fabric OS 5.x command reference guide 635
Advertisement
Table of Contents
