HP StorageWorks 2/64 - Core Switch Command Reference Manual page 573
Hp storageworks fabric os 5.x command reference guide (aa-rvhvb-te, september 2005)
Hide thumbs
Also See for StorageWorks 2/64 - Core Switch:
- Reference manual (278 pages) ,
- Installation manual (166 pages) ,
- Administrator's manual (152 pages)
Table of Contents
Advertisement
--quickmode
If no operand is specified, the session becomes interactive and the user is prompted to enter FCS switch
members and passwords.
If the -currentpwd option is not used, the session becomes interactive and the user is prompted to
enter new passwords for root, factory, admin, user, and non-FCS admin accounts.
Examples
To enable secure mode using --quickmode:
fcsprimary:admin> secModeEnable --quickmode
Your
use of
installed on this equipment is subject to the End User License Agreement
provided
which you may review at http://www.switchkeyactivation.com/cps. By
using
these security features, you are consenting to be bound by the
these
promptly contact the entity from which you obtained this software and do
not use these security features.
Do you agree to these terms?
This command requires Switch Certificate,
license to be installed on
PLEASE NOTE: On successful completion of this command, login sessions
may be closed and some switches may go through a reboot to form a secure
fabric.
Non-FCS admin password will be set the same as FCS admin password.
ARE YOU SURE
Please enter current admin account password:
Secure mode is enabled.
This option is a shorthand notation for a combination of the
--currentpwd, --lockdown, and --fcs "*" options. On
successful execution of the command, security is enabled in the
fabric with all switches being FCS, all switches having passwords
identical to that of the primary FCS and SCC, and DCC policies
capturing and maintaining the current configuration of the fabric.
This option can be used only on a fabric with secure mode disabled
and only when the command is run on the switch specified as the
primary FCS switch.
the certificate-based
with the equipment and the Certification
documents.
If you
(yes, y, no, n): [no] y
security features
do not agree to the terms of these documents,
(yes, y, no, n): [no] y
Security license and Zoning
every switch in the fabric.
Fabric OS 5.x command reference guide 573
of the
software
Practices Statement,
terms of
Advertisement
Table of Contents
