Portcamshow - HP StorageWorks 2/64 - Core Switch Command Reference Manual

portCamShow

Displays port-based filter CAM utilization.
Synopsis
portcamshow [slotnumber/][portnumber]
Availability
all users
Description
Use this command to display the current filter CAM utilization of all ports or one port specified at input.
The following information is displayed:
SID used
DID used
SID entries
DID entries
SID free
DID free
Operands
This command has the following operands:
slotnumber
portnumber
442 Fabric OS commands
Total number of CAM entries used by this port. Note that each CAM
entry (either SID or DID CAM) can be shared among ports in the same
quad.
Total number of CAM entries used by this port. Note that each CAM
entry (either SID or DID CAM) can be shared among ports in the same
quad.
All existing source ID entries within the CAM per quad. Note that each
CAM entry (either SID or DID CAM) can be shared among ports in the
same quad.
All existing destination ID entries within the CAM per quad. Note that
each CAM entry (either SID or DID CAM) can be among ports in the
same quad.
Total number of free SID CAM entries per quad.
Total number of free DID CAM entries per quad.
For bladed systems only, specify the slot number of the port to display,
followed by a slash (/).
Specify the port number to display, relative to its slot for bladed
systems. Use
switchShow
if omitted, information for all ports is displayed.
to list valid ports. This operand is optional;