Secure Fabric Os Commands; Hp Secure Fabric Os Commands - HP StorageWorks 2/64 - Core Switch Command Reference Manual

Secure Fabric OS commands

The commands listed in
detailed information about security, see the HP StorageWorks Secure Fabric OS user guide.)
Table 26

HP secure fabric OS commands

Command
secFabricShow
secFCSFailover
secHelp
secModeDisable
secModeShow
secNonFcsPasswd
secPolicyAbort
secPolicyActivate
secPolicyAdd
secPolicyCreate
secPolicyDelete
secPolicyDump
secPolicyFCSMove
secPolicyRemove
secPolicySave
secPolicyShow
secStatsReset
secStatsShow
secTempPasswdReset
secTempPasswdSet
secTransAbort
secVersionReset
Table 26 are available with the purchase of an HP Security license key. For more
Description
Displays security related fabric information.
Enables a backup FCS switch to take over as primary FCS switch.
Display information about security telnet commands.
Enable security mode.
Disable security mode.
Display if security mode is enabled or disabled.
Set the admin password for non-FCS switches.
Aborts all changes to the defined database that have not been
saved.
Apply defined policy set to all switches in the fabric.
Add members to an existing policy.
Create a new policy.
Delete an existing policy.
Display all members of existing policies.
Move a member in the FCS policy.
Remove members from an existing policy.
Save a defined security policy to flash memory on all switches in
the fabric.
Display an existing security policy.
Reset security statistic for a policy or all policies to 0.
Display security statistic for a policy or for all policies.
Reset a password on a remote switch.
Set a temporary password on a remote switch.
Abort current security transaction.
Reset the version stamp to 0.
Fabric OS 5.x command reference guide 771