Diagenablepost - HP StorageWorks 2/64 - Core Switch Command Reference Manual
Hp storageworks fabric os 5.x command reference guide (aa-rvhvb-te, september 2005)
Hide thumbs
Also See for StorageWorks 2/64 - Core Switch:
- Reference manual (278 pages) ,
- Installation manual (166 pages) ,
- Administrator's manual (152 pages)
Table of Contents
Advertisement
diagEnablePost
Enables power-on self-test (POST) execution at next reboot.
Synopsis
diagenablepost
Availability
admin
Description
Use this command to enable POST. A reboot is not required for this command to take effect. POST includes
two phases: POST Phase I mainly tests hardware and POST Phase II tests system functionality.
NOTE:
This command disables POST on both Core Switch 2/64 logical switches.
Operands
none
Examples
To enable the POST during future power-ons:
switch:admin> diagenablepost
Config update Succeeded
Diagnostic POST is now enabled.
See also
diagDisablePost
Fabric OS 5.x command reference guide 143
Advertisement
Table of Contents
