Secpolicyremove - HP StorageWorks 2/64 - Core Switch Command Reference Manual
Hp storageworks fabric os 5.x command reference guide (aa-rvhvb-te, september 2005)
Hide thumbs
Also See for StorageWorks 2/64 - Core Switch:
- Reference manual (278 pages) ,
- Installation manual (166 pages) ,
- Administrator's manual (152 pages)
Table of Contents
Advertisement
secPolicyRemove
Removes members from an existing policy.
Synopsis
secpolicyremove "name" [, "member [;member]"]
Availability
admin
Description
Use this command to remove members from an existing security policy. If a policy is empty after removing
all members, all accesses to the policy are disallowed (the DCC_POLICY and OPTIONS_POLICY are
exceptions). You cannot remove all members from FCS_POLICY, and you cannot remove the FCS
members from SCC_POLICY.
NOTE:
This command can be issued only from secure mode and only from the primary FCS switch..
Operands
This command has the following operands:
name
Specify the name of an existing policy you want to remove members from. Valid values
for this operand are: DCC_POLICY_nnn
FCS_POLICY
TELNET_POLICY
HTTP_POLICY
API_POLICY
RSNMP_POLICY
WSNMP_POLICY
SES_POLICY (HP does not support SES_POLICY)
MS_POLICY
SERIAL_POLICY
FRONTPANEL_POLICY
SCC_POLICY
OPTIONS_POLICY
The specified policy name must be capitalized.
The DCC_POLICY policy name has the common prefix DCC_POLICY_ followed by a
string of user defined characters. These characters do not have to be capitalized like
regular policy names, but are case sensitive. This operand is required.
Fabric OS 5.x command reference guide 597
Advertisement
Table of Contents
