HP StorageWorks 2/64 - Core Switch Command Reference Manual page 779

Table 28 switchAdmin commands (continued)
Command
fabricPrincipal
fabricShow
fabStateClear
fabStateResize
fabStateShow
fabStatsShow
fabSwitchShow
fanShow
fastBoot
fcPing
fcpLogClear
fcpLogDisable
fcpLogEnable
fcpLogShow
fcpProbeShow
fcpRlsShow
fdmiCacheShow
fdmiShow
ficonClear
ficoncupset
ficoncupshow
ficonShow
firmwareCommit
firmwareDownload
firmwareDownloadStatus
firmwareRestore
Description
Sets principal switch selection mode.
Displays fabric membership information.
Clears the fabric state information.
Changes the number of state entries.
Displays the fabric state information.
Displays the fabric statistics.
Displays the fabric switch state structure information.
Displays fan status and speed.
Reboots the control processor (CP), bypassing power-on self-test (POST).
Sends a Fibre Channel Extended Link Service (ELS) ECHO request to a
pair of ports.
Clears the FCPD debug information log (debug command).
Disables the FCPD debug information log (debug command).
Enables the FCPD debug information log (debug command).
Displays the FCPD debug information log (debug command).
Displays the Fibre Channel Protocol (FCP) probe information.
Display the Fibre Channel Protocol (FCP) Read Link Status (RLS)
information.
Displays abbreviated remote FDMI device information, according to
remote domain ID.
Displays detailed FDMI device information.
Clears the records from the specified FICON database.
Sets FICON-CUP parameters for a switch.
Displays FICON-CUP parameters for a switch.
Displays the contents of the specified FICON database.
Commits switch firmware.
Downloads switch firmware from a remote host or local directory.
Displays the status of a firmware download.
Restores the former active firmware image.
Fabric OS 5.x command reference guide 779