Fabricshow - HP StorageWorks 2/64 - Core Switch Command Reference Manual

fabricShow

Displays fabric membership information.
Synopsis
fabricshow
Availability
all users
Description
Use this command to display information about switches in the fabric.
If the switch is initializing or disabled, the message no fabric is displayed. If the fabric is
reconfiguring, some or all switches might not display; otherwise, the following fields display:
Switch ID
world wide name
Enet IP Addr
FC IP Addr
Name
Operands
none
Examples
The following example illustrates a fabric of four switches. "sw180" is the principal switch. Three of the
switches are configured to run IP over Fibre Channel.
switch:admin> fabricshow
Switch ID
-------------------------------------------------------------------------
64: fffc40 10:00:00:60:69:00:06:56
65: fffc41 10:00:00:60:69:00:02:0b
66: fffc42 10:00:00:60:69:00:05:91
67: fffc43 10:00:00:60:69:10:60:1f
The Fabric has 4 switches
See also
switchShow
188 Fabric OS commands
The switch Domain_ID and embedded port D_ID
The switch WWN
The switch Ethernet IP address
The switch FC IP address
The switch symbolic name. An arrow (>) indicates the principal
switch.
Worldwide Name Enet IP Addr FC IP Addr
192.168.64.59 192.168.65.59
192.168.64.180 192.168.65.180 >"sw180"
192.168.64.60 192.168.65.60
192.168.64.187 0.0.0.0
Name
"sw5"
"sw60"
"sw187"