Fanshow - HP StorageWorks 2/64 - Core Switch Command Reference Manual
Hp storageworks fabric os 5.x command reference guide (aa-rvhvb-te, september 2005)
Hide thumbs
Also See for StorageWorks 2/64 - Core Switch:
- Reference manual (278 pages) ,
- Installation manual (166 pages) ,
- Administrator's manual (152 pages)
Table of Contents
Advertisement
fanShow
Displays fan status and speed.
Synopsis
fanshow
Availability
all users
Description
Use this command to display the current status and speed of each fan in the system.
Fan status is displayed as:
OK
absent
below minimum
above minimum
unknown
faulty
NOTE:
The output from this command varies depending on switch type and number of fans present.
Operands
none
Examples
To display information on the fans in the system:
switch:admin> fanshow
Fan #1 is OK, speed is 2721 RPM
Fan #2 is OK, speed is 2657 RPM
Fan #3 is OK, speed is 2700 RPM
See also
chassisShow
fanDisable
fanEnable
psShow
200 Fabric OS commands
Fan is functioning correctly.
Fan is not present.
Fan is present but rotating too slowly or stopped.
Fan is rotating too quickly.
Unknown fan unit installed.
Fan has exceeded hardware tolerance and has stopped. In this
case, the last known fan speed is displayed.
Advertisement
Table of Contents
