Iodreset - HP StorageWorks 2/64 - Core Switch Command Reference Manual
Hp storageworks fabric os 5.x command reference guide (aa-rvhvb-te, september 2005)
Hide thumbs
Also See for StorageWorks 2/64 - Core Switch:
- Reference manual (278 pages) ,
- Installation manual (166 pages) ,
- Administrator's manual (152 pages)
Table of Contents
Advertisement
iodReset
Turns off the in-order delivery (IOD) option.
Synopsis
iodreset
Availability
admin
Description
Use this command to turn off the IOD option. The IOD option is turned off by default; however, if the IOD
option was turned on using iodSet, this command can be used to turn it off again. Disabling IOD allows
fast re-routing after a fabric topology change.
This command might cause out-of-order delivery of frames during fabric topology changes.
Operands
none
Examples
To turn off the IOD option:
switch:admin> iodreset
switch:admin> iodshow
IOD is not set
See also
iodSet
iodShow
Fabric OS 5.x command reference guide 311
Advertisement
Table of Contents
