Perfmonitorclear - HP StorageWorks 2/64 - Core Switch Command Reference Manual

perfMonitorClear

Clears counters of end-to-end, filter-based, and ISL performance monitors on a port.
Synopsis
perfmonitorclear --class monitor_class [slotnumber/]portnumber [monitorId]
Availability
admin
Description
Use this command to clear counters for performance monitors on a port, specified by class. Monitor
classes include end-to-end monitors (EE), filter-based monitors (FLT), and inter-switch link monitors (ISL).
Issuing the
portStatsClear
ISL monitors) for all the ports in the same quad.
Operands
This operands are as follows:
--class
monitor_class
slotnumber
portnumber
monitorId
Examples
To clear statistics counters for an end-to-end monitor:
switch:admin> perfMonitorClear --class EE 1/2 5
End-to-End monitor number 5 counters are cleared
switch:admin> perfMonitorClear --class EE 1/2
This will clear ALL EE monitors' counters on port 2, continue?
(yes, y, no, n): [no] y
command on a port clears all end-to-end and filter-based monitors (but not
The monitor class, which can be one of EE (end-to-end), FLT
(filter-based), or ISL (inter-switch link). These values are case sensitive.
This operand is required.
For bladed systems only, this operand specifies the slot number of the
port on which the monitor is to be added, followed by a slash (/).
Specifies the number of the port on which the monitor is to be added,
relative to its slot for bladed systems. Use
ports.
Specifies the monitor number to clear. Monitor numbers are defined are
created, and can be displayed using perfMonitorShow. This operand
is optional; if omitted, this command clears all monitor counters of the
appropriate monitor_class on the port. This operand does not apply
to ISL monitors.
for a list of valid
switchShow
Fabric OS 5.x command reference guide 421