HP StorageWorks 2/64 - Core Switch Command Reference Manual page 784

Table 28 switchAdmin commands (continued)
Command
qloopAdd
qloopCreate
qloopDelete
qloopRemove
qloopShow
quietMode
reboot
routeHelp
saveCore
secHelp
sensorShow
setDbg
setEsdMode
setGbicMode
setMediaMode
setModem
setSfpMode
setVerbose
sfpShow
shellFlowControlDisable
shellFlowControlEnable
slotOn
slotPowerOff
slotPowerOn
slotShow
snmpConfig
snmpMibCapSet
784 MUA-based roles
Description
Adds a member to a QuickLoop.
Creates a QuickLoop.
Deletes a QuickLoop.
Removes a member from a QuickLoop.
Displays QuickLoop information.
Sets or clears the telnet session quiet mode, or displays the current
mode.
Reboots either one control processor (CP) or the entire system.
Displays a list of FSPF-related commands.
Saves or removes core files created by daemons.
Displays information about security commands.
Displays sensor readings.
Sets debug level of the specified module.
Enables or disables ESD mode.
Enables or disables media mode.
Enables or disables media mode.
Enables or disables modem dial-in to a control processor (CP).
Enables or disables media mode.
Specifies module verbose level.
Displays serial ID SFP information.
Disables XON/XOFF flow control on the console serial ports.
Enables XON/XOFF flow control on the console serial ports.
Enables a blade slot.
Removes power from a slot.
Restores power to a slot.
Displays the status of all slots in the system.
Manages the SNMP agent configuration.
Modifies options for configuring SNMP MIB trap capability.