Nsshow - HP StorageWorks 2/64 - Core Switch Command Reference Manual

nsShow

Displays local Name Server (NS) information.
Synopsis
nsshow [-r -t]
Availability
all users
Description
Use this command to display local NS information about devices connected to this switch.
The following message is displayed if there is no information in this switch:
There is no entry in the Local Name Server
The
nsAllShow
Each line of output displays:
Type
PID
COS
PortName
NodeName
TTL
SCR
Device type
Permanent Port Name
There might be additional lines if the device has registered any of the following information (the switch
automatically registers SCSI inquiry data for FCP target devices):
• FC4s supported
• IP address
• IPA
• Port and node symbolic names
• Fabric Port Name. This is the WWN of the port on the switch to which the device is physically
connected.
• Hard address and/or port IP address
command displays information from all switches.
U for unknown, N for N_Port, NL for NL_Port.
24-bit Fibre Channel address.
List of classes of service supported by device.
Device port world wide name (WWN).
Device node WWN.
Time-to-live, in seconds, for cached entries or NA (not
applicable) if the entry is local. This displays if the -r option is
given.
State change registration of the device. This displays if the -r
option is given.
Device type if -t is given.
Physical N_Port or NL_Port WWN.
Fabric OS 5.x command reference guide 377