Perfaddipmonitor - HP StorageWorks 2/64 - Core Switch Command Reference Manual

perfAddIPMonitor

Adds a filter-based performance monitor for IP frame count.
Synopsis
perfaddipmonitor [slotnumber/]portnumber [alias]
Availability
admin
NOTE: This command requires a Performance Monitor license.
Description
Use this command to define filter-based monitors to count the number of IP traffic frames. Only frames
transmitted are counted.
After a successful execution of this command, a monitor number is displayed. The monitor number is
provided for manipulation of these filter-based performance monitors. The optional user-defined alias is
also displayed, if one is specified. All valid monitor numbers and user-defined aliases can be displayed
with the
perfShowFilterMonitor
The maximum number of filters is eight per port, including user-defined filters, read filters, write filters,
read/write filters, SCSI frame monitor, and IP frame monitor.
Operands
The operands are as follows:
slotnumber
portnumber
alias
Optionally, a comma can separate the operands. A space is required to separate the operands even
when using commas.
Examples
To add an IP monitor to a port:
switch:admin> perfaddipmonitor 1/4 "IP_MONITOR"
IP traffic frame monitor #0 added
command.
For bladed systems only, this operand specifies the slot number of the
port on which the monitor is to be added, followed by a slash (/).
Specifies the number of the port on which the monitor is to be added,
relative to its slot for bladed systems. Use
ports.
Specify a name for this monitor. This string truncates to a maximum of 10
characters. It might be surrounded by quotation marks, in order to
include spaces. This operand is optional. The default alias is IP
Frame.
for a list of valid
switchShow
Fabric OS 5.x command reference guide 397