Perfclearfiltermonitor - HP StorageWorks 2/64 - Core Switch Command Reference Manual

perfClearFilterMonitor

Clears statistics counters of a filter-based performance monitors.
Synopsis
perfclearfiltermonitor [slotnumber/]portnumber [monitorId]
Availability
admin
NOTE: This command requires a Performance Monitor license.
This command is deprecated; use
Description
Use this command to clear statistics counters for all filter-based performance monitors on a port, or a
filter-based monitor associated with a specific monitorId.
Issuing
portStatsClear
Operands
This command has the following operands:
slotnumber
portnumber
monitorId
Optionally, a comma can separate the operands. A space is required to separate the operands even
when using commas.
Examples
To clear statistics counters for a filter-based monitor:
switch:admin> perfclearfiltermonitor 1/2 4
Filter-based monitor number 4 counters are cleared
switch:admin> perfclearfiltermonitor 1/2
This will clear ALL filter-based monitors' counters on port 2, continue?
(yes, y
, no, n): [no] y
414 Fabric OS commands
perfMonitorClear
on a port also results in all filter-based monitors clearing.
For bladed systems only, this operand specifies the slot number of the
port on which the monitor is to be added, followed by a slash (/).
Specifies the number of the port on which the monitor is to be added,
relative to its slot for bladed systems. Use
ports.
Specify the monitor number to clear. Monitor numbers are defined when
created and can be displayed using perfShowEEMonitor. This
operand is optional. If not specified, all monitor counters on the port are
cleared.
instead.
for a list of valid
switchShow