HP StorageWorks 2/64 - Core Switch Command Reference Manual page 211

-p pattern
-b
-q
source
destination
Examples
switch:admin> fcPing 10:00:00:00:c9:29:0e:c4 21:00:00:20:37:25:ad:05
Source:
Destination:
Zone Check:
Pinging 10:00:00:00:c9:29:0e:c4 [0x20800] with 12 bytes of data:
received reply from 10:00:00:00:c9:29:0e:c4: 12 bytes time:1162 usec
received reply from 10:00:00:00:c9:29:0e:c4: 12 bytes time:1013 usec
received reply from 10:00:00:00:c9:29:0e:c4: 12 bytes time:1442 usec
received reply from 10:00:00:00:c9:29:0e:c4: 12 bytes time:1052 usec
received reply from 10:00:00:00:c9:29:0e:c4: 12 bytes time:1012 usec
5 frames sent, 5 frames received, 0 frames rejected, 0 frames timeout
Round-trip min/avg/max = 1012/1136/1442 usec
Pinging 21:00:00:20:37:25:ad:05 [0x211e8] with 12 bytes of data:
Request rejected
Request rejected
Request rejected
Request rejected
Request rejected
5 frames sent, 0 frames received, 5 frames rejected, 0 frames timeout
Round-trip min/avg/max = 0/0/0 usec
Specifies up to 16 "pad" bytes, which are used to fill out the
request frame payload that is sent. This is useful for diagnosing
data-dependent problems in the fabric link. The pattern bytes
are specified as hexadecimal characters. For example, -p ff
causes the request frame to be filled with all 1s.
Specifies to bypass the zone check functionality.
Specifies quiet output. Only the zoning information and the
summary line appear upon program termination.
Specifies the source port ID, port WWN, or node WWN.
Specifies the destination port ID, port WWN, or node WWN.
10:00:00:00:c9:29:0e:c4
21:00:00:20:37:25:ad:05
Not Zoned
Fabric OS 5.x command reference guide 211