Fwalarmsfilterset - HP StorageWorks 2/64 - Core Switch Command Reference Manual
Hp storageworks fabric os 5.x command reference guide (aa-rvhvb-te, september 2005)
Hide thumbs
Also See for StorageWorks 2/64 - Core Switch:
- Reference manual (278 pages) ,
- Installation manual (166 pages) ,
- Administrator's manual (152 pages)
Table of Contents
Advertisement
fwAlarmsFilterSet
Enables or disables alarms for Fabric Watch.
Synopsis
fwalarmsfilterset [mode]
Availability
admin
NOTE:
This command requires a Fabric Watch license.
Description
Use this command to configure alarm filtering for Fabric Watch. By turning off the alarms, all
non-environment class alarms are suppressed. By turning on the alarms, all class alarms are generated.
Operands
This command has the following operand:
mode
Examples
To enable alarms in Fabric Watch:
switch:admin> fwalarmsfilterset
Committing configuration...done.
FW: Alarms are disabled
switch:admin> fwalarmsfilterset 1
Committing configuration...done.
FW: Alarms are enabled
See also
fwAlarmsFilterShow
Specify 1 to enable the alarms, 0 to disable the alarms. If no
operand is specified, the default value is 0 (alarms deactivated). This
operand is optional.
Fabric OS 5.x command reference guide 257
Advertisement
Table of Contents
