Powerofflistshow - HP StorageWorks 2/64 - Core Switch Command Reference Manual

powerOffListShow

Displays slot power-off list order.
Synopsis
powerofflistshow
Availability
all users
Description
Use this command to display the order in which the physical slots will be powered off. The
system-available power is compared to the system demand power to determine if there is enough power
to operate. If there is less power available than the demand, then the power-off list is processed until there
is enough power for the system to operate.
If the system abruptly goes from a state in which there is enough power to run all inserted and powered
on FRUs to a state in which there is not enough power to run everything (for instance, when a third power
supply is removed from the chassis so there is suddenly only one power supply is available to power a
fully loaded system), no processing of the power-off list can be done. This is because the lack of power
causes the CP boards' processors to cease execution of the firmware. In this situation, all operation of the
system terminates immediately. However, if the system is running on two power supplies (this is not
recommended) and one goes into a predicted fail state (in which the power supply is still supplying
power), the power-off list is processed as described.
The format of the display varies, depending on the switch model and the number of slots present.
Operands
none
Examples
To display the slot power-off list order:
switch:admin> powerOffListShow
Slot 10 will be powered off 1st
Slot 9 will be powered off 2nd
Slot 8 will be powered off 3rd
Slot 7 will be powered off 4th
Slot 6 will be powered off 5th
Slot 5 will be powered off 6th
Slot 4 will be powered off 7th
Slot 3 will be powered off 8th
Slot 2 will be powered off 9th
Slot 1 will be powered off 10th
Fabric OS 5.x command reference guide 533