Zonedelete; Zoneremove; Zoneshow - HP StorageWorks 2/64 - Core Switch Command Reference Manual

zoneAdd
Adds a member to the zone.
Synopsis
zoneadd "zoneName", "member;member"
Availability
admin
NOTE: This command requires HP Advanced Zoning license, which is included within the Base
Configuration Services and bundled with each B-series switch.
Description
Use this command to add one or more members to an existing zone.
This command changes the defined configuration. For the change to be preserved across switch reboots,
it must be saved to flash memory using the
appropriate zone configuration must be enabled using the
NOTE: When security mode is enabled, this command can be issued only from the primary FCS switch.
Operands
The following operands are required:
zoneName
member
Examples
To add aliases for three disk arrays to Blue_zone:
switch:admin> zoneadd "Blue_Zone", "array3; array4; array5"
See also
zoneCreate

zoneDelete

zoneRemove

zoneShow

750 Fabric OS commands
cfgSave
Specify the name of an existing zone, in quotation marks. This
operand is required.
Specify a member or list of members to be added, in quotation
marks, separated by semicolons. Valid values can be one or more of
the following:
A switch domain and port area number pair; for example, 2, 20.
View the area numbers for ports using the
Node or port WWN.
QuickLoop AL_PA.
Zone alias name.
command. For the change to become effective, an
command.
cfgEnable
switchShow
command.