Switchstart - HP StorageWorks 2/64 - Core Switch Command Reference Manual
Hp storageworks fabric os 5.x command reference guide (aa-rvhvb-te, september 2005)
Hide thumbs
Also See for StorageWorks 2/64 - Core Switch:
- Reference manual (278 pages) ,
- Installation manual (166 pages) ,
- Administrator's manual (152 pages)
Table of Contents
Advertisement
switchStart
Initializes a previously shut down switch.
Synopsis
switchstart
Availability
admin
Description
Use this command to initialize one switch without disrupting the other switch in the dual-switch chassis.
This command has to be used in combination with switchShutdown.
This command starts all the daemons associated with the switch, initializes the object states associated
with the switch to a clear state, and enables all the ports and blades associated with the switch.
NOTE:
This command is not supported on single-domain systems.
Operands
none
Examples
To initialize the current switch:
switch:admin> switchstart
Initializing kernel modules...Done.
Starting all switch daemons...Done.
Powering on slot 1...Done.
Powering on slot 4...Done.
Checking diagnostics...Done.
setup FCIP IP: ifconfig fc0 ip=0.0.0.0, netmask=255.255.255.0
See also
switchReboot
switchShutdown
Fabric OS 5.x command reference guide 695
Advertisement
Table of Contents
