-duration count
--ports itemlist
Examples
To test the serial link of the following port path:
switch:admin> sltest -ports 0/5-0/31 -speed 4 -lb_mode 1 passcnt 1
Running Port sltest ....
passed.
Diagnostic
When it detects failures, the test might report one or more of the following error messages:
DATA
ERRSTAT
INIT
STATS
TIMEOUT
See also
cmemRetentionTest
crossPortTest
itemList
portRegTest
spinSilk
638 Fabric OS commands
Specifies the duration, in milliseconds, to perform this test on the
primitive. The default value is 100.
Specifies a list of blade ports to test. By default all the blade ports in the
specified slot (--slot) is used. See
for further details.
itemList