HP StorageWorks 2/64 - Core Switch Command Reference Manual page 708

-unit id
Diagnostics
Each diagnostic test in this suit might report its own set of error messages when it detects failures. See the
"Diagnostics" section of individual diagnostic test help pages. These messages are available only in the
log file.
See the HP StorageWorks Fabric OS 5.x diagnostics and system error messages reference guide for
more information.
Examples
To initiate a system verification test on all switches in the fabric:
switch:admin> systemverification -short
systemverification: Setting parameters for short run.
systemverification: burnin parameters.
CURRENT - KEYWORD
1
systemverification: Arming the burnin run on switch 0.
systemverification: Starting burnin on Switch 0
systemverification: Monitoring progress of the burnin activity.
systemverification: Outputting Status
State
COMPLETED
708 Fabric OS commands
Use to focus testing on a single FRU in the system. The id for a
FRU type of BLADE correlates to the slot number of the FRU to be
tested.
- number_of_runs
2 - vib : 2
10 - thermal
SYSTEMVERIFICATION
2 - min_lb_mode
1 - tbr_passes
1 - prt_on
1 - cntmem_on
1 - cmi_on
1 - retention_on
1 - cam_on
1 - flt_passes
1 - sta_passes
1 - plb_nframes
1 - txd_nframes
1 - xpt_nframes
1 - bpt_nframes
1 - slk_nmegs
1 - bpt_all_nframes
1 - slk_all_nmegs : 50
Status
PASS
: DEFAULT
: 1
: 10
- label : BURNIN
: 2
: 1
: 1
: 1
: 1
: 1
: 1
: 50
: 25
: 100
: 50
: 200
: 20
: 50
: 30
Run Cmd TotCmds Script
1 22 22 switchburnin.sh