HP StorageWorks 2/64 - Core Switch Command Reference Manual page 307

Operands
This command has the following operands:
slotnumber
portnumber
When no slot number and port number are specified, this command displays the interface information for
all ports on the switch (including non-E_Ports).
Examples
To display FSPF interface information:
switch:user> interfaceshow 1/4
idbP
Interface 4 data structure:
nghbP
ifNo
masterPort
defaultCost
cost
delay
lastScn
lastScnTime
upCount
lastUpTime
downCount
lastDownTime
downReason
iState
Neighbor 4 data structure:
(continued on next page)
For bladed systems only, specify the slot number of the port to
display, followed by a slash (/).
Specify the port number to display, relative to its slot for bladed
systems. Use
switchShow
optional; if omitted, the interface information for all ports is
displayed.
= 0x1008b3d0
= 0x1008c668
= 4
= 4 (self)
= 500
= 500
= 1
= 16
= Apr 02 20:01:44.458
= 2
= Apr 02 20:01:44.458
= 1
= Apr 02 20:01:09.050
= 2
= UP
to list valid ports. This operand is
Fabric OS 5.x command reference guide 307