HP StorageWorks 2/64 - Core Switch Command Reference Manual page 93

Operands
This command has the following optional operands:
pattern
mode
Examples
To display all zone configurations that start with "Test":
switch:admin> cfgshow "Test*"
cfg:
cfg:
To display all zone configuration information:
switch:admin> cfgshow
Defined configuration:
cfg:
cfg:
zone:
1,1; array1; 1,2; array2
zone:
1,0; loop1
alias: array1
alias: array2
alias: loop1
Effective configuration:
cfg:
zone:
1,1
21:00:00:20:37:0c:76:8c
21:00:00:20:37:0c:71:02
1,2
21:00:00:20:37:0c:76:22
21:00:00:20:37:0c:76:28
zone:
1,0
21:00:00:20:37:0c:76:85
21:00:00:20:37:0c:71:df
To display only configuration names:
switch:admin> cfgshow "*"
cfg:
cfg:
A POSIX-style regular expression used to match zone
configuration names. The pattern must be enclosed in quotation
marks, and can contain:
• Question mark (?), which is a placeholder for any single
character
• Asterisk (*), which is a placeholder for any string of
characters
• Ranges, which are a placeholder for any character within the
range. Ranges must be enclosed in brackets: for example,
[0-9] or [a-f].
Specify 0 to display the contents of the transaction buffer (the
contents of the current transaction) or specify 1 to display the
contents of flash memory. The default value is 0.
Test1 Blue_zone
Test_cfg Red_zone; Blue_zone
USA1 Blue_zone
USA_cfg Red_zone; Blue_zone
Blue_zone
Red_zone
21:00:00:20:37:0c:76:8c; 21:00:00:20:37:0c:71:02
21:00:00:20:37:0c:76:22; 21:00:00:20:37:0c:76:28
21:00:00:20:37:0c:76:85; 21:00:00:20:37:0c:71:df
USA_cfg
Blue_zone
Red_zone
USA1 Blue_zone
USA_cfg Red_zone; Blue_zone
Fabric OS 5.x command reference guide 93