portAlpaShow
Displays the arbitrated loop physical addresses (AL_PAs) of devices attached to a port.
Synopsis
portalpashow [slotnumber/]portnumber
Availability
all users
Description
Use this command to display the device AL_PAs present in a port and whether these devices are public or
private. If the port is not an active FL_Port or if it does not have any AL_PA, this command displays an
error.
Operands
This command has the following operands:
slotnumber
portnumber
Examples
To display the AL_PAs of a port:
switch:user> portalpashow 4/14
AL_PA
0xe2
See also
switchShow
For bladed systems only, specify the slot number of the port to display,
followed by a slash (/).
Specify the port number to display, relative to its slot for bladed systems.
Use
switchShow
type
AL_PA
public
0xe4
to list valid ports.
type
AL_PA
public
Fabric OS 5.x command reference guide 439
type