Switchcfgspeed - HP StorageWorks 2/64 - Core Switch Command Reference Manual

switchCfgSpeed

Configures all ports of a switch to a particular speed.
Synopsis
switchcfgspeed speed_level
Availability
admin
Description
Use this command to configure the speed of all the ports on a switch to a particular level. The
configuration is saved in flash memory and persists across switch reboots or power cycles. If any port on
the switch is not capable of the specified speed setting, an error message appears for that port.
The output of
desired speed setting.
Operands
This command has the following required operand:
speed_level
Examples
To set the speed level for all ports on a switch:
switch:admin> switchcfgspeed 0
Committing configuration...done.
See also
portCfgSpeed
portShow
displays the achieved speed level and
portShow
Specify the speed of a port. Valid values are one of the following:
0 Auto-sensing mode. The port automatically configures for the
highest speed.
1 1-Gb/s mode. The port is fixed at 1 Gb/s.
2 2-Gb/s mode. The port is fixed at 2 Gb/s.
4 4-Gb/s mode. The port is fixed at 4 Gb/s.
displays the user's
portCfgShow
Fabric OS 5.x command reference guide 685