Part Code 8605 - HP StorageWorks P9000 Manual

Table 73 Error codes (part code 8510) (continued)
Part Error
Code Number
8510 59067
8510 59101
8510 59102
8510 591 10
8510 591 14
8510 79000
8510 79001
8510 79002

Part code 8605

Table 74 Error codes (part code 8605)
Part Error
Code Number
8605 6012
8605 6022
8605 7060
8605 65753
Error Message
The maximum number of SSIDs that can
be registered will be registered except
the duplicate SSIDs.
The SSID(s) are associated with the
specified CU. All SSIDs that are
associated with the CU are to be added
to this SLPR.
The SSID(s) are associated with the
specified CU. All SSIDs that are
associated with the CU are to be deleted
from this SLPR.
SSIDs that are associated with the
selected CU cannot be added to this
SLPR because too many SSIDs have been
set in the SLPR.
Ports in high-speed mode are set across
multiple SLPRs. If you perform this
operation, the user having access to
these SLPRs will become unable to use.
Do you want to continue this operation?
Notice from Partition Definition:
Installation of Open System Array
Management is required to create more
than four CLPRs.
Notice from Partition Definition:
Additional cache memory is required for
CLPR0 to create a CLPR.
Notice from Partition Definition:
CLPR cannot be made any more.
Error Message
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
Invalid character is included in the e-mail
addresses or the server addresses.
Recommended Action
Check the settings.
Check the settings.
Check the settings.
Delete unnecessary SSIDs from this SLPR,
and then retry the operation.
Check the settings.
Click [OK].
Click [OK].
Click [OK].
Recommended Action
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Confirm the e-mail address or the server
address where the error occurred,
remove the invalid characters, then retry
the registration.
Severity
Level
W
i
i
W
E
i
i
i
Severity
Level
E
E
E
E
Part code 8605 289