Part Code 6810 - HP StorageWorks P9000 Manual

Part code 6810

Table 58 Error codes (part code 6810)
Part Error
Code Number
6810 5122
6810 7440
6810 9101
6810 9102
6810 9106
6810 9107
6810 91 1 1
6810 55212
6810 55214
6810 55219
6810 59046
6810 59047
232 Message (part code group 6nnn)
Error Message
No data has been changed.
An error occurred during SVP
processing.
Do you want to cancel?
Do you want to apply?
The value that is under setup is not
reflected yet. Do you want to change the
mode?
The value that is under setup is not
reflected yet. Do you want to continue
the operation?
Do you want to delete the specified line
of settings from the Preview list?
The options "Block Option" and "Do not
Block (Volume Level)" cannot be
specified at the same time.
The Level 2 Threshold setting is incorrect.
The Sleep Time setting is incorrect.
This function will apply the setting to all
the target CLPRs. This function will
overwrite the setting on a CLPR if the
setting is already applied to the CLPR.
Are you sure you want to continue this
operation?
If a CC pair exists, it may become
suspended depending on the settings
Are you sure you want to continue this
operation?
Recommended Action
The operation has been rejected because
there is no data to set. Click [OK], then
go on to the next operation.
If this problem persists, please contact
HP Technical Support.
To cancel the operation, click [OK].
To execute the operation in Preview,
click [OK].
To change the mode, click [OK].
Otherwise, click [Cancel].
To continue the processing, click [OK].
Otherwise, click [Cancel].
To delete the specified line of settings
from the Preview list, click [OK].
Otherwise, click [Cancel].
Correct the setting, then retry. If the same
problem persists despite retrying, please
contact HP Technical Support.
Correct the setting, then retry. If the same
problem persists despite retrying, please
contact HP Technical Support.
Correct the setting, then retry. If the same
problem persists despite retrying, please
contact HP Technical Support.
To continue processing, click [OK]. To
stop processing, click [Cancel].
To continue processing, click [OK]. To
stop processing, click [Cancel].
Severity
Level
W
E
i
i
W
W
W
W
W
W
W
W