Show Version - Cisco Catalyst 2950 Command Reference Manual

Chapter 2 Cisco IOS Commands

show version

Use the show version user EXEC command to display version information for the hardware and
firmware.
Syntax Description
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History Release
12.0(5.2)WC(1)
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show version command:
Switch> show version
Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(9)EA1
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Wed 27-Feb-02 06:51 by antonino
Image text-base:0x80010000, data-base:0x804E2000
ROM:Bootstrap program is C2950 boot loader
Switch uptime is 1 hour, 54 minutes
System returned to ROM by power-on
System image file is "flash:c2950-i6q4l2-mz.121-0.0.9.EA1.bin"
cisco WS-C2950G-12-EI (RC32300) processor with 20830K bytes of memory.
Last reset from system-reset
Running Enhanced Image
12 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address:00:05:74:28:09:C0
Configuration register is 0xF
78-11381-05
show version [ | {begin | exclude | include} expression]
(Optional) Display begins with the line that matches the specified
expression.
(Optional) Display excludes lines that match the specified expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was first introduced.
Catalyst 2950 Desktop Switch Command Reference
show version
2-219