Show Version - Cisco Catalyst 2950 Command Reference Manual

show version

show version
Use the show version user EXEC command to display version information for the hardware and
firmware.
Syntax Description | begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.0(5.2)WC(1)
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show version command:
Note
Switch> show version
Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(9)EA1
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Wed 27-Feb-02 06:51 by antonino
Image text-base:0x80010000, data-base:0x804E2000
ROM:Bootstrap program is C2950 boot loader
Switch uptime is 1 hour, 54 minutes
System returned to ROM by power-on
System image file is "flash:c2950-i6q4l2-mz.121-0.0.9.EA1.bin"
cisco WS-C2950G-12-EI (RC32300) processor with 20830K bytes of memory.
Last reset from system-reset
Running Enhanced Image
12 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)
32K bytes of flash-simulated non-volatile configuration memory.
Catalyst 2950 and Catalyst 2955 Switch Command Reference
2-414
show version [ | {begin | exclude | include} expression]
(Optional) Display begins with the line that matches the specified
expression.
(Optional) Display excludes lines that match the specified expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Though visible in the show version output, the configuration register information is not
supported on the switch.
Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
0L-10102-01