Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010 User Manual page 1390

To use the current view to export
For Export, select <Current View/Sheet Only>. Notice the only view listed and selected is the currently active
view. The view is selected by default and will be output with the exported file.
NOTE Sets do not need to be saved or validated. They maintain their last configured status at all times.
To create a new set to export
1 Click
2 Enter a name in the New Set dialog and click OK. The new set will be displayed in the Export
3 To filter your view choices, for Show in list, select Views in the Model, Sheets in the Model, or
4 Select views for the set by clicking their associated Include box. A check mark indicates that a
To create a new set by duplicating another
1 For Export, select the set to be duplicated.
2 Click
3 Enter a name in the Duplicate Set dialog and click OK. The new set will be displayed in the
4 To filter your view choices, for Show in list, select Views in the Set, Sheets in the Set, or All views
5 Select and deselect views for the set by clicking their associated Include box. A check mark
Modifying View and Sheet Sets
Modifying the views and sheets in an existing set is a matter of adjusting their Include status in the list.
1 On the
2 For Show in list, select from the Set and Model filters to narrow and broaden your choices.
3 Select and deselect views for the set by clicking their associated Include box. A check mark
To rename a set
1 For Export, select the set to be renamed.
2 Click
3 Enter a name in the Rename Set dialog and click OK.
1348 | Chapter 24 Interoperability
(New Set).
drop-down list.
All views and sheets in the Model.
view has been selected.
The set is now available for use and may be selected from the Export drop-down list at any time.
(Duplicate Set).
Export drop-down list.
The set is now available for use and may be selected from the Export drop-down list at any time.
If the set is to be adjusted with different views and sheets, proceed with the following steps.
and sheets in the Set.
indicates that a view has been selected.
View/Sheet Set tab
indicates that a view has been selected.
NOTE When modifying view and sheet sets, changes are immediate and do not need to be saved
or validated. They maintain their last configured status at all times.
(Rename Set).
The renamed set is immediately changed in the Export drop-down list.
on page 1346, for Export, select the set to be modified.