Intel SR870BN4 - Server Platform - 0 MB RAM Product Manual page 99

Retry Interval
This field sets the number of milliseconds that the BMC waits between trying to send SOL
messages to a remote client.
The value entered must be between 0 and 2559. The SMU truncates the digit in the ones column
from any input number because the firmware maintains this value in 10 millisecond intervals.
Therefore, any value that is entered between 0 and 9 is displayed as 0.
Baud Rate
This field sets the baud rate at which serial data is transferred by the BMC when SOL is active.
The choices are Default IPMI, 9600 bps, 19.2 kbps, 38.4 kbps, 57.6, and 115.2
kbps. If Default IPMI is selected, the baud rate used is the rate currently set for BIOS serial
redirection. When SOL is active, serial communication with the BMC always occurs with eight
data bits, no parity, one stop bit, and RTS/CTS (hardware) flow control.
Intel® SR870BN4 Server System Product Guide 99