Removing And Installing The Top Covers - Intel SR870BN4 - Server Platform - 0 MB RAM Product Manual

Removing and Installing the Top Covers

WARNING
Make sure that the rack is anchored securely so it will not tilt forward
when the server chassis is extended. A crush hazard exists should the
rack tilt forward which could cause serious injury.
CAUTION
For proper cooling and airflow, do not operate the server with the cover
removed. Always reinstall the cover before turning the server on.
CAUTION
Do not leave the chassis cover open or a system fan removed any longer than
necessary; system cooling could be reduced.
The server comes with removable top covers that allow the PCI add-in cards and the system fans to
be hot-swapped, and the midplane board to be serviced.
NOTE
Sliding the I/O bay out of the chassis also accesses the PCI add-in cards and
system fans. However, power must first be removed from the system.
182 Intel® SR870BN4 Server System Product Guide