Intel SR870BN4 - Server Platform - 0 MB RAM Product Manual page 132

After the FRUs are loaded, the FRU list and FRU area viewer are displayed. By default, the first
FRU in the list is selected and displayed. If there is an error while retrieving the FRUs, the
following message is displayed:
Error reading FRU at Device D Bus B ID I
D, B, and I are the values from the device locator record. This message will vary depending on the
FRU type, but it will display sufficient information for the user to display/update the FRU with the
FRUSDR utility.
The user is unable to stop either the FRU locator search or the FRU load process.
Viewing FRUs
To view a FRU, click on the FRU title in the FRU display list. The FRU board, chassis, and
product areas are displayed on the right of the screen. If the area does not exist for the selected
FRU, the following message is displayed for that area:
Not present
Only the displayable FRUs are in the list. The name that is used in the list is taken from the device
locator record. If no displayable FRUs are present in the system, the title and value areas will
contain the following message:
Not present
The FRU list is replaced by the message:
No Displayable FRUs present in system
The FRU that is currently being shown on the right side of the screen will appear as a string in the
FRU list. It is not selectable.
132 Intel® SR870BN4 Server System Product Guide