Intel SR870BN4 - Server Platform - 0 MB RAM Product Manual page 109

To edit a policy, click in the radio button next to the item and then click Edit to display the Edit
Alert Policy Entry screen. After configuring the Alert Policy information, click Save to complete
this sub-task.
Edit Alert Policy Entry
When the user selects an alert policy on the Alert Policy Configuration screen and then click the
Edit button, the Edit Alert Policy Entry screen will be seen, as shown below. Changes made on
this screen apply to the alert policy selected when the user clicked Edit.
After clicking OK on this screen, the user is returned to the Alert Policy Configuration screen
After completing this screen, click Ok to return to the Alert Policy Configuration screen.
Enable Policy Entry
This check box enable / disables the selected policy table entry. If disabled, the firmware does not
look at that table entry when attempting to match entries to the event that occurred. This option is
enabled when the box is checked.
Policy Number
This edit box associates a policy number with a policy table entry. If the selected table entry is
already associated with a policy number, that policy number is displayed. If a policy number is not
associated with the selected table entry, one is displayed.
If alerts are associated with event filters, a valid policy number is required. Therefore, it is not
possible to select zero as a policy number.
Intel® SR870BN4 Server System Product Guide
Figure 35. Edit Alert Policy Entry
109