Intel SR870BN4 - Server Platform - 0 MB RAM Product Manual page 24

Hot-swap Hard Disk Drive Bay
The hot-swap hard disk drive carrier (see Figure 5) is designed to accept 15,000-RPM (and slower)
Ultra320 SCSI technology SCA-type hard disk drives.
The peripheral bay is designed to support Low Voltage Differential (LVD) SCSI disk drives only.
Single-Ended (SE) SCSI devices are not supported in the peripheral bay. SE drives are only
supported on the external SCSI connector.
The carriers contain light-pipes that allow dual color LED indicators to show through the bezel to
display hard disk drive status as described in Table 4.
Table 4. SCSI Hard Drive LED Details
Feature
Green, flashing
Yellow/Green flashing
Yellow/Blank flashing
Not illuminated
24
A
B
A Carrier latch
B Status indicator
Figure 5. Hard Disk Drive Carrier
Description
Indicates the hard drive is active
Indicates a hard drive fault and hard drive is powered
Indicates a hard drive fault and hard drive is not powered
Indicates no hard drive is installed in the bay
Intel® SR870BN4 Server System Product Guide
OM12933